GBA SP 3.0inch IPS Laminated Screen Kit

FunnyPlaying GBA SP 3 Inch IPS LCD Screen with Laminated Lens

(Same screen as GBA laminated 3.0inch IPS kit.)

No soldering required! One wire can be soldered for access to the OSD menu and brightness control, if desired.

Perfect for upgrade for your GBA SP with this IPS screen to further enhance your viewing pleasure of this popular Nintendo handheld. 

Can be installed in an original or an aftermarket GBA SP shell

The kit comes with a laminated glass lens already attached. With a laminated display the air gap between the display and front glass is removed. This greatly increases the viewing experience and removes the worry about dust and dirt getting under the lens.

This kit is suitable for the AGS-101 and the AGS-001 consoles.

To install this kit there is no soldering required. This screen is plug and play. Soldering is optional.

What is included;

• 1 x IPS LCD Screen with black lens
• 1 x ribbon cable 
• 1 x wire
• 1 x foam pad

Install guide:

https://funnyplaying.com/blogs/gameboy-advance-news/tutorial-for-gbasp-laminate-3-0-ips-kit

Notes;

1. OSD menu including options for screen colour and brightness etc is available with the soldering of 1 wire. IPS screen will function on a fixed brightness level without this wire if you choose not to install it.  

2. Please test your screen kit for faults before installation, photo or video will be required for potential warranty claims. Any issues are to be reported before installing inside a shell or adhering to a gasket. Once stuck down it will not remove without damaging the screen or the ribbon. 

3. It is advisable to wear a static bracelet before installing the screen to avoid any potential shorts.

4. The words on the screen are complete. (Blanked for photo only)